Here's a short post on communicating with the raspberry from your phone's browser.
Our goal is to turn an LED connected to the Pi on and off, by accessing a web page on the phone's browser. Both the phone and the Pi are on the local WiFi network.
Here's how we do it:
Start a web server on the Pi. For this, we will use the simple and elegant Bottle web framework, which consists of a single source file. Accessing the LED control web page displays a button, and clicking on it uses jQuery AJAX to send a request to the web server, which in turn changes the GPIO pin state to turn the LED on.
Here's the code:
To start it, first run the server on your Pi. (You can ssh into your pi for this.)
pi@raspberrypi ~/code/python/bottle $ sudo python ledctrl.py
Then, access the web page from your phone's browser. In my case, the address is:
You can control the LED from anywhere as long as you are in the local network. This can also work, from outside provided you do port forwarding on your router. I plan to explore this myself.
This is the starting point for me for a Raspberry Pi based home monitor robot. Watch this site for updates on this topic!
Need help with a hardware project or product? Drop us an email at firstname.lastname@example.org. We offer consulting services on AVR and Nordic nRF BLE - hardware design, firmware development, prototyping, PCB design/assembly, sourcing and manufacturing. We can help you bring your product to market!
Bluey nRF52 BLE IoT dev board
We love hearing from our readers. Email us at email@example.com for questions or comments on this article. If you found this article useful, please support us by buying some of our hardware products.