I am feeling a little nostalgic. So I rebuilt one of the first circuits I put together when I started messing around with circuits in eighth grade. It’s a very simple beginner project, and might appeal to your child – real or inner!
Here’s a short post on communicating with the raspberry from your phone’s browser.
Our goal is to turn an LED connected to the Pi on and off, by accessing a web page on the phone’s browser. Both the phone and the Pi are on the local WiFi network.
No, it’s not the $10000 Leica lens of similar name.
For this project, I wanted to try and make a simple night lamp – something that you can put under your cot and use it simply by picking it up. Useful in case you get up in the middle of the night and need a quick light. So I used a tilt switch and a 555 IC to design the circuit.
I used SMD components for this project for compactness. If you haven’t done any SMD soldering before, don’t be intimidated by it. You can solder many types of SMD packages (SOT23, TQFP, 1206, etc) using just a soldering iron with a small chisel tip, and a pair of tweezers. If you add a hot air rework station to your tools, you can even solder tiny QFN packages which have all leads under the device.
Here is a very informative and entertaining cartoon guide to SMD soldering.
Here is a video of the project:
You can find all relevant files at our GitHub link below:
This is a small project that I worked on last year. I have a desk made of dark wood, and it was very difficult to see what was inside the bottom draw. I put together a simple circuit with the schematic below – something which lit up a few strips of LEDs using a magnet stuck to the side of the door to switch a transistor on/off.
I also made a video with my old iPhone 3GS and uploaded it to youtube.
This has been a great inspiration for me to share the projects I am working on.